Canon PIXMA MP610 Series Servis Kılavuzu - Sayfa 31
Hepsi Bir Arada Yazıcı Canon PIXMA MP610 Series için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Canon PIXMA MP610 Series 45 sayfaları. All-in-one photo inkjet printer
Ayrıca Canon PIXMA MP610 Series için: Buradan başlayın (2 sayfalar), Tamamlayıcı Kılavuz (6 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar), Hızlı Başlangıç Kılavuzu (40 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
- 1. Table of Contents
- 1. 1 Maintenance
- 1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer
- 1. Customer Maintenance
- 1. Special Tools
- 1. Serial Number Location
- 2. 2 List of Error Display / Indication
- 2. Operator Call Errors
- 2. Service Call Errors
- 2. Other Error Messages
- 2. Warnings
- 2. Troubleshooting by Symptom
- 3. 3 Repair
- 3. Notes on Service Part Replacement
- 3. Adjustment / Settings
- 3. Verification Items
<Destination settings>
In the destination settings mode, press the Stop/Reset button the specified number of time(s) according to the destination listed in the
table below, and press the ON/OFF button.
LED
Time(s)
indication
0 times
Green (Power)
1 time
Orange (Alarm) Japan
2 times
Green (Power) Korea
3 times
Orange (Alarm) US
4 times
Green (Power) Europe
5 times
Orange (Alarm) Australia
6 times
Green (Power) Asia
7 times
Orange (Alarm) China
8 times
Green (Power) Taiwan
9 times
Orange (Alarm) Latin America
10 times
Green (Power) Brazil
11 times
Orange (Alarm) Canada
12 times or
Green (Power)
more
After setting the destination, confirm the model name and destination in service test print or EEPROM
information print.
<Ink absorber counter resetting>
Reset the ink absorber counter (to 0%) when the ink absorber is replaced, or when necessary after the logic board is replaced.
1) In the service mode, press the Stop/Reset button 4 times, then press the ON/OFF button. The ink absorber counter value of the
EEPROM is reset to 0%.
2) The flag for resetting of the ink absorber counter is set to ON, and the ink absorber counter value is automatically printed from the
selected paper source.
("D=000.0" is printed at the top left of the paper.) See
<Ink absorber counter setting>
Set the ink absorber counter value to a new EEPROM after the logic board is replaced in servicing.
1) Before replacement of the logic board, check the ink absorber counter value in EEPROM information print.
2) In the service mode, press the Stop/Reset button 13 times, then press the ON/OFF button to enter the ink absorber counter setting
mode.
3) In the ink absorber counter setting mode, press the ON/OFF button again to enter the main ink absorber counter setting mode.
(Since the procedure for setting the ink absorber counter is common among all the models, this step is necessary to set the counter
value for the main ink absorber.)
4) The ink absorber counter value can be set in 10% increments by pressing the Stop/Reset button. Press the Stop/Reset button the
appropriate number of time(s) to select the value which is closest to the actual ink absorber counter value.
Destination
No change of the
destination
Return to the destination
selection
3-4. Verification Items, (2) Ink absorber counter value print, "print sample."
CD / DVD print
---
Supported
Not supported
Not supported
Supported
Supported
Supported
Supported
Supported
No sales of the
MP610
No sales of the
MP610
Not supported
---
29 / 43