Doug Fleenor Design E2E Yapılandırma Kılavuzu - Sayfa 7
Medya Dönüştürücü Doug Fleenor Design E2E için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Doug Fleenor Design E2E 8 sayfaları. Ethernet to ethernet protocol converter
Sayfayı YazdırExample 2 – No Traffic Separation – sACN system with ArtNet dimmer:
When there is a single router in a system, and network traffic is not a concern, both the Ethernet
in and Ethernet out may be connected to the router. The router will issue IP addresses to all of
the DHCP enabled devices on the network, and Node Discovery will be able to see both
interfaces on the E2E. The network usage is doubled for each universe going into the E2E in
port. This is represented with the black/red lines in the below diagram. In cases where the
network uses static addressing, or the light board provides a DHCP server, the Ethernet router
should be changed to an Ethernet switch in the example below.
Figure 4: Single Network described in Example 2
Page 7 of 8