Ampler Curt 2019-2021 Manuel - Sayfa 13

Bisiklet Ampler Curt 2019-2021 için çevrimiçi göz atın veya pdf Manuel indirin. Ampler Curt 2019-2021 18 sayfaları.

Software restart

Torque sensor calibration

Electric system support

Ampler hardware (the battery, controller and sensors) are inserted

into the down tube. This keeps the bike clean, the weight down, and

the components safe from outside elements such as the rain and cold

temperature.

The hardware doesn't need any special maintenance. However, we

recommend to keep your bike Firmware up to date and calibrate your

bike sensors from time to time. This will help to keep your bike in a

good shape for longer time.

Software restart clears up your bikes memory and starts it fresh. It

helps to resolve any problems connected to the hardware, and any

communication problems between the bike and the mobile app.

To reset your bike

1. Hold down the power button for 10 seconds. This will reset and

turn off your bike.

2. Turn on the bike again from the power button.

Ampler bikes are pedelecs and they have sensors regulating the

motor, measuring the speed of pedalling and your own input power.

Therefore, the bike is easy to use and the motor power is controlled

according to your own pedaling force. This creates a safe and smooth

riding experience.

We recommend to calibrate your bike's torque sensor every 3–6

months, or in case the bike feels over- or underpowered. Torque

sensor calibration is done via the Ampler app:

1. Adjust the left crank forward, parallel to the ground.

2. Connect the Ampler app with your bike via Bluetooth

3. Open 'Vehicle' setting from the menu

4. Click on 'torque sensor calibration'

5. The LED blinks in

6. The LED will turn

Re-adjusting the sensor signal helps to improve your bike's responsi-

veness and power to its original figures.

orange

green

once the calibration is successful