Ampler Curt 2019-2021 Manuel - Sayfa 4

Bisiklet Ampler Curt 2019-2021 için çevrimiçi göz atın veya pdf Manuel indirin. Ampler Curt 2019-2021 18 sayfaları.

You need

Adjust the handlebar

CAUTION!

Setup

• 4 mm hex key

• 6 mm hex key

• Pedals

1. Loosen the two stem clamping screws on the side with the 4 mm

hex key.

2. Now straighten the handlebars. Do not tighten the bolts yet.

3. When you move the bike back and forth with the front brake

applied, you may feel the cover between the frame and the headset

move.

4. To fix this, gently tighten the top bolt of the stem cap until the

cover stops moving.

CAUTION! Be careful not to overtighten the bolts on Curt. The maxi-

mum torque for the stem clamp bolts is 6 nm, the torque for the

stem cap should not exceed 2 nm.

90°

5. Take the 4 mm hex key and carefully tighten the same side bolts

that you loosened in the beginning. Turn your handlebar left and

right and make sure it moves smoothly. If it feels a little too tight,

loosen the side bolts and the cap screw only slightly.