Ampler Curt 2019-2021 Manuel - Sayfa 7

Bisiklet Ampler Curt 2019-2021 için çevrimiçi göz atın veya pdf Manuel indirin. Ampler Curt 2019-2021 18 sayfaları.

Turning the bike on

Charging your Ampler

IMPORTANT!

State of charge

Using the power button

Just press the power button once on the power panel, located on the

left side of the bike.

bike is OFF

The battery level is between 40%-90% when you receive it. You can

either plug in the charger and make the battery full, but you can also

grab it out of the box and go.

IMPORTANT! First make sure that the charging port on the bike, as

well as the plug of the charger, is clean, dry and free from metallic

objects.

Charging the bike is like charging a laptop. Just connect the bike with

a standard wall power outlet (110–240 V AC) and hook the magnetic

charger plug to the charging socket located on the power panel and

let it charge. Once the LED on the charger turns from red to green it

has been fully charged. It takes about 2.5 hours from empty to full.

Ampler charger will automatically stop charging when the battery is

full. There is no risk of overcharging the battery when you forget to

unplug it. Pease read the "Charger safety instructions"

The power button also acts as a battery charge monitor. The LED

colours change according to the state of charge.

100–75%

1x short press

74–50%

49–10%

bike is ON

9–0%