Ampler Curt 2019-2021 Manuel - Sayfa 6

Bisiklet Ampler Curt 2019-2021 için çevrimiçi göz atın veya pdf Manuel indirin. Ampler Curt 2019-2021 18 sayfaları.

Final check before your first ride

Adjust the seat height

Setup

The bike has made a long journey before reaching you, double-check

the following things:

1. Check the wheels. Spin the wheels and see if they run freely.

2. Check the tyres pressure and make sure the tyres are full before

your first ride. Learn more about the correct tyre pessure on page

10 of this manual.

3. Test the brakes. Spin the front wheel and the rear wheel separately.

Apply the brake levers separately and make sure the brakes are

working correctly.

4. Check the drivetrain. Pedal by hand and check if the chain or the

belt drive runs freely. If your model has gearing, shift through them.

5. Check your bike visually. Does everything seem alright?

Remember to check your bike regularly and read the maintenance

instructions

Take the 4 mm hex key and adjust the perfect seat height

1. Place the bike in a way that allows you to support yourself against

a wall when sitting on it.

2. Put one pedal in its lowest position.

3. Hop on and try to reach the pedal with your heel.

4. You have the perfect seat height when you are able to place your

heel on the pedal with an almost fully stretched leg. Do not lower

the seatpost below the minimum insertion length marked on the

post.

5. Tighten your seat bolts.

And you are good to go!