Anden A100 Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 6

Nem Alıcı Anden A100 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Anden A100 16 sayfaları.

DRAIN INSTALLATION

The drain outlet on the dehumidifier can be hard piped using a 3/4" PVC Slip x 3/4" MNPT fitting and 3/4" nominal drain tubing or the provided 3/4"

MNPT x 3/4" hose barb fitting . 3/4" clear PVC tubing can be used to drain the dehumidifier . Always maintain a constant downward slope from the

dehumidifier to the drain and do not allow soft tubing to curl up which may result in air lock .

NOTE: PTFE thread seal tape is recommended for the threaded connection and hand tighten only . If hard pipe is used, PVC primer and cement is

recommended for the slip fit connection . Remove drain insert before priming and gluing in the PVC fitting . Replace drain insert after PVC glue has

fully dried .

CAUTION

Do not damage drain insert. The drain insert is a critical feature of the dehumidifier drain management system.

WARNING

Running the dehumidifier without the drain insert can lead to condensate leaks. See FIGURE 7.

FIGURE 7 – DRAIN INSERT

DRAIN INSERT

90-2607