Anderson Oper-SRB Kullanım Kılavuzu - Sayfa 5

Brülör Anderson Oper-SRB için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Anderson Oper-SRB 12 sayfaları.

Sayfayı Yazdır
Flame inner tube
The flame inner tube is made of silicon carbide, which can withstand higher temperatures;
the standard segment spherical coupling method is used for splicing, which has a certain
degree of flexibility and allows slight bending and deformation of the radiant tube. Refer
to Fig 2.
4.1 Burner data sheet
There are 5 models for SRB, Table 1 shows burner models and capacity, with gas and air inlet
pressure requirement
Burner
Burner
Input
Model
Gas
Number
kW
SRB025
25
SRB036
36
SRB060
60
SRB100
100
SRB180
180
SRB250
250
Anderson Thermal Soluions（Suzhou）Co., Ltd
Figure 2: Self-recuperative burner inner tube
– When the power outage is more than 10 minutes,
remove the burner from furnace, to prevent the burner
from being damaged.
– The exhaust tube is extremely hot, please do not
touch by hand.
– Do not remove the metal gas hose or locking device
when the gas is not completely shut down
Table 1 Burner model and capacity
Diameter
Gas Flow (NCMH)
D (mm)
Minimum
86
0.8
122
1.2
140
2.0
177
3.3
229
6.0
260
8.3
Attention!
Gas Pressure
Required @Burner
(mbar)
Maximum
Maximum
2.5
100
3.6
100
6.0
100
10.0
100
18.0
100
25.0
100
3
Combustion Air
Pressure @Burner
(mbar)
Maximum
60
60
60
60
60
60