Daikin R32 Split Series Kurulum Kılavuzu - Sayfa 7

Fan Daikin R32 Split Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Daikin R32 Split Series 20 sayfaları. R32 split series
Ayrıca Daikin R32 Split Series için: Kurulum Kılavuzu (17 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum Kılavuzu (17 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (14 sayfalar), Kurulum Kılavuzu (14 sayfalar), Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (8 sayfalar), Kurulum Kılavuzu (17 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum Kılavuzu (14 sayfalar), Kurulum Kılavuzu (14 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum Kılavuzu (17 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (13 sayfalar)

Sayfayı Yazdır

Daikin R32 Split Series Kurulum Kılavuzu

Right-side, right-back, or right-bottom piping.

1) Attach the drain hose to the underside of the refrigerant pipes with

adhesive vinyl tape.

2) Wrap the refrigerant pipes and drain hose together with insulation tape.

3) Pass the drain hose and refrigerant pipes through the wall hole, then set

the indoor unit on the mounting plate hooks by using the

the top of the indoor unit as a guide.

4) Open the front panel, then open the service lid.

(Refer to installation tips.)

5) Pass the inter-unit wire from the outdoor unit through the feed-through

wall hole and then through the back of the indoor unit.

Pull them through the front side. Bend the ends of tie wires upward for

easier work in advance. (If the inter-unit wire ends are to be stripped first,

bundle wire ends with adhesive tape.)

6) Press the bottom frame of the indoor unit with both hands to set it on the

mounting plate hooks. Make sure the wires leads do not catch on the

edge of the indoor unit.

Left-side, left-back, or left-bottom piping.

How to replace the drain plug and drain hose

• Removal method

1) Rotate to detach wire clip from hook on the right and remove

the drain hose.

2) Remove the drain plug on the left side and attach it to the

right side.

3) Insert the drain hose and tighten by rotating the wire clip to

hook.

Forgetting to tighten this may cause water leakages.

1) Attach the drain hose to the underside of the refrigerant pipes

with adhesive vinyl tape.

2) Be sure to connect the drain hose to the drain port in place of a

drain plug.

3) Shape the refrigerant pipe along the pipe path marking on the

mounting plate.

4) Pass drain hose and refrigerant pipes through the wall hole,

then set the indoor unit on mounting plate hooks, using the

markings at the top of indoor unit as a guide.

5) Pull in the inter-unit wiring.

6) Connect the inter-unit piping.

Drain hose

Caulk this hole

with putty or

caulking material.

Bind with plastic tape.

INSTALLING INDOOR UNIT

Mounting plate

Wrap insulating tape around

the bent portion of refrigerant

pipe. Overlap at least half the

width of the tape with each turn.

Right-side piping

Remove pipe port cover here

for right-side piping

Remove pipe port cover here for

right-bottom piping

markings at

mark

When stripping the

ends of inter-unit wire

in advance, bundle

the wire lead ends

with insulation tape.

Drain hose attachment position

The drain hose is on the back of the unit.

Left side

Attachment on the left side

Remove pipe port cover

here for left-bottom piping.

Insert a hexagon wrench

(4mm)

ENGLISH

Right-back piping

Right-

Bind refrigerant pipe and

bottom

drain hose together with

piping

insulation tape.

Mounting plate

Hang indoor unit's hook here.

Mounting plate

Inter-unit wire

Wire guide

Right side

Front side of unit

Attachment on the right side

(factory default)

Wire clip

Drain hose

Back view of unit

Remove pipe port cover

here for left-side piping.

Left-side piping

Left-back piping

Left-bottom piping

 How to set drain plug

Do not apply lubricating oil (refrigerant

machine oil) when inserting.

Application causes deterioration and

drain leakage of the plug.