3M Litmann Quality 3100 Talimatlar Kılavuzu - Sayfa 4
Tıbbi Ekipman 3M Litmann Quality 3100 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. 3M Litmann Quality 3100 16 sayfaları. Mining cable splice kit
Ayrıca 3M Litmann Quality 3100 için: Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
3.0
Replace Insulation
3.1
Apply one half-wrapped layer of 3M
from edge of taper to edge of taper.
Note: Scotch
Glass Cloth Tape 27 or Scotch
®
included, may be added and used at this time.
3.2
Apply highly-stretched half-lapped layers of Scotch
Tape 130C (tacky side DOWN) over 1700P tape and up onto tapers. Build up
half-lapped layers of tape gradually going out on existing insulation ½" (13 mm)
past top of tapers. Tape should be wrapped to a thickness equal to or greater than
the original insulation.
past end of taper
3.3
Starting ½" (13 mm) past end of 130C tape apply one half-lapped layer of
1700P tape over the 130C tape, extending ½" (13 mm) past the other end of the
130C tape.
½" (13 mm)
past end of
previous layer
½" (13 mm)
Temflex
Vinyl Electrical Tape 1700P
™
™
Glass Cloth Tape 69, while not
®
3M
Temflex
™
Figure 5
Scotch
Linerless Rubber Splicing Tape 130C
®
Tacky Side DOWN
Figure 6
3M
Temflex
™
Figure 7
4
Electrical Vinyl Tape 1700P
™
Linerless Rubber Splicing
®
½" (13 mm)
past end of taper
½" (13 mm)
past end of
previous layer
Vinyl Electrical Tape 1700P
™
78-8127-6830-3-C