AOK ISF Series Kurulum Kılavuzu

Dış Mekan Işığı AOK ISF Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. AOK ISF Series 3 sayfaları.

Installation Guide

This procedure is designed as an installation aid. Skilled tradespeople that are familiar with general construction and electrical

installation techniques should pe orm the installation. Licensed electricians should provide electrical installation connections.

Installations and connections should be done in accordance with all national and local codes and permits. In no way is this

document intended to construe warranty or fitness of use of the products described, nor is it intended to provide safety instruction

for those installing the product.

WARNING

Before proceeding with installation or service maintenance of this product.

• Disconnect power to reduce electrical shock risk.

• Review the entire Installation Guide.

• Inspect this properly packaged product for any damage that may have occurred during transit.

• Verify product application complies with manufacturer design recommendations.

• Verify the availability of necessary tools and incidental material.

• Verify applicable code requirements. Field assembly and installation are subject to acceptance by local inspection authority.

• Appropriate safety equipment to be determined by end user, per applicable safety standards and precautions.

Type-U Bracket Installation (Without visor)

1-1

The lamp cap rotates 360 degrees

1-3

Angle adjustment scale:

ISF Series Installation Guide

*Due to the constant improvements in product development, individual parameters might change. Please refer to our sales or R&D team for most up-to-date content as

specifications are subject to change without notice.

1-2

Tools:

10mm inner

hexagon wrench

M12 socket

hexagon screw

Safety rope

Torque of 142Nm

Ø416.0mm

Ø20.5mm

Ø13.0mm

Angle: 8°

50.0mm

Ø13.0mm

130.0mm

1-4 Braket with driver box

The first step:

1) Fix the angle of U bracket and fixture body, then adjust

the angle according to the result simulated by computer.

2) Use a special tool and a torque of 142Nm to fix the U

bracket and fixture body with 2 M12 inner hexagon screws,

as shown in Fig. (1), (2) and (3).

Fig. (1)

Fixture body

M12 screws

U bracket

Fig. (2)

Fig. (3)

Wiring Diagram

Positive (Fixture)

Negative (Fixture)

Ground

(Fixture)

SPD

External terminal

Input

The second step:

Use special tools to fix the U bracket and the plate with

driver box on the lamp pole with two M12 screws with a

torque of 142Nm, as shown in Fig (4), (5) and (6).

Fig. (4)

Fig. (5)

Fig. (6)

Conduit

Driver

Output

[email protected]

+1 626-986-4050 (US)

+86 755 2357 9148 (CN)