Casio 2590 Kullanıcı Kılavuzu

İzle Casio 2590 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Casio 2590 3 sayfaları. 2590; 2591

Casio 2590 Kullanıcı Kılavuzu
USER'S GUIDE 2590/2591
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to carefully read this manual and keep it on hand for later reference
when necessary.
Expose the watch to bright light to charge its battery before using it.
You can use this watch even as its battery is being charged by exposure to bright
light.
• Be sure to read "Battery" of this manual for important information you
need to know when exposing the watch to bright light.
If the display of the watch is blank...
If the Power Saving on (P.SAVE) indicator flashes on
the display, it means that the display is blank because
the watch's Power Saving function has turned off
the display to conserve power. Power Saving
automatically turns off the display and puts the watch
into a sleep state whenever your watch is left for a
certain period where it is dark.
• The initial factory default setting is Power Saving on.
• The watch recovers from the sleep state if you move it
to a well-lit area, if you press any button, or if you
angle the watch towards your face for reading.
• See "Power Saving Function" for more
information.
General Guide
• Press C to change from mode to mode.
• In any mode, press B to illuminate the display.
Timekeeping Mode
Press
Timekeeping
Use the Timekeeping Mode to set and view the current
PM indicator
time and date.
Day of week
To set the time and date
Month – Day
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select other settings.
Seconds
Day
Hour : Minutes Seconds
3. When the setting you want to change is flashing, press D to change it as
described below.
To change this setting
Press D to reset to 00.
Seconds
Press D to increase the setting.
Hour, Minutes, Year, Month, Day
• Pressing D while the seconds are in the range of 30 to 59 resets them to 00 and
adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.
4. Press A to exit the setting screen.
• The day of the week is automatically displayed in accordance with the date (year,
month, and day) settings.
• The year can be set in the range of 2000 to 2099.
• The watch's built-in full automatic calendar automatically makes allowances for
different month lengths and leap years. Once you set the date, there should be no
reason to change it except after you have the watch's battery replaced or when
battery power drops to Level 4.
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and
24-hour timekeeping.
• With the 12-hour format, the PM (Module 2590: PM/Module 2591: P) indicator
appears to the left of the hour digits for times in the range of noon to 11:59 p.m. and
no indicator appears to the left of the hour digits for times in the range of midnight to
11:59 a.m.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
Alarm Mode
.
Hour
Minutes
Month
Year
Perform this button operation
About This Manual
• The operational procedures for Modules 2590 and 2591
are identical. All of the illustrations in this manual show
Module 2590.
• Button operations are indicated using the letters shown
in the illustration.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
[Module 2590]
found in the "Reference" section.
[Module 2591]
• In any mode, hold down C for about two seconds to return to the Timekeeping
Mode.
Countdown Timer
Stopwatch Mode
Mode
Alarms
You can set up to five independent multi-function alarms
Alarm date
with hour, minutes, month, and day. When an alarm is
(Month-Day)
turned on, the alarm tone sounds when the alarm time is
reached. One of the alarms can be configured as a
snooze alarm or a one-time alarm, while the other four are
one-time alarms.
You can also turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.
• There are five alarms numbered
configure Alarm
alarm. Alarms
Alarm time
alarms only.
(Hour : Minutes)
• Alarm settings (and an Hourly Time Signal setting) are
available in the Alarm Mode, which you enter by
Alarm number
pressing C.
Alarm Types
The alarm type is determined by the settings you make, as described below.
• Daily alarm
Set the hour and minutes for the alarm time. This type of setting causes the alarm to
sound everyday at the time you set.
• Date alarm
Set the month, day, hour and minutes for the alarm time. This type of setting causes
the alarm to sound at the specific time, on the specific date you set.
• 1-Month alarm
Set the month, hour and minutes for the alarm time. This type of setting causes the
alarm to sound everyday at time you set, only during the month you set.
• Monthly alarm
Set the day, hour and minutes for the alarm time. This type of setting causes the alarm
to sound every month at time you set, on the day you set.
To set an alarm time
1. In the Alarm Mode, use D to scroll through the alarm
screens until the one whose time you want to set is
displayed.
• To set a one-time alarm, display one of the screens indicated by an alarm number
2
5
from
through
. To set the snooze alarm, display the screen indicated by
2. After you select an alarm, hold down A until the hour setting of the alarm time
starts to flash, which indicates the setting screen.
• This operation automatically turns on the alarm.
3. Press C to move the flashing in the sequence shown below to select other
settings.
Hour
Minutes
Dual Time Mode
1
5
through
. You can
1
as a snooze alarm or a one-time
2
5
through
can be used as one-time
Press
.
1
.
Month
Day
1