AudioControl ACX-BT1 Kullanıcı Kılavuzu - Sayfa 3

Alıcı AudioControl ACX-BT1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AudioControl ACX-BT1 6 sayfaları. Bluetooth receiver with aptx hd support

Sayfayı Yazdır

Remote, Power, and Output Connections

1. Remote Turn-On Output (Blue) – This 12v DC/20mA remote

output is designed to turn on a connected amplifier. This output

is only active after audio has begun playing and will remain active

for approximately 7 seconds after audio playback has ceased.

2. 12 Volt Power Input (Fused @ 2A) (Red) – Connect this lead

to an accessory (switched) power source from your vehicle. If

no switched power source is available, a rocker or toggle switch

could also be used to turn the unit on/off.

Note: Depending on the vehicle type and application, you may wish

to connect this lead to a constant 12V power source instead. Be aware

that if the unit is connected in this manner that there will be a small

amount of constant current drawn from the connected power source.

3. Ground Input (Black) – Connect this lead to a solid ground con-

nection from your vehicle.

4. Left RCA line level output (Gray) – This RCA lead connects to the

LEFT low-level input of your amplifier or source unit.

5. Right RCA line level output (Blue) – This RCA lead connects to

the RIGHT low-level input of your amplifier or source unit.