AudioControl ACX-BT1 Kullanıcı Kılavuzu - Sayfa 4

Alıcı AudioControl ACX-BT1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AudioControl ACX-BT1 6 sayfaları. Bluetooth receiver with aptx hd support

Sayfayı Yazdır

Quick Start

Here are a few general steps to get your ACX-BT1 Bluetooth

Receiver up and running:

1. Undo the +12V and Ground connections to the vehicle battery

before making any connections to the Bluetooth receiver.

2. Pick a mounting location that will provide access to the controls

and connections, provide plenty of good ventilation, and also

protect the Bluetooth receiver from heat, moisture, and dirt.

3. The ACX-BT1 can be securely mounted using the two mounting

holes located in each side.

4. Before drilling any holes, take every precaution to prevent any

damage to fuel lines, power and other electrical wiring, hydraulic

brake lines, and other systems, that might compromise vehicle

safety.

5. When making connections, designate red RCA plugs as right

(the ACX-BT1 uses a blue connector for the right channel), and

designate white, black, or gray plugs as left. This is a good idea

for all signal connections made in your audio system. The key is

consistency. Stick with the same color coding and you'll reduce

possible problems.

6. Use quality interconnect cables.

7. Connect the +12V input terminal of the unit to an accessory

(switched) power source from your vehicle. Use 16-22 gauge

wire. Connect the Ground terminal of the unit to a solid ground

connection from your vehicle using the same wire gauge as the

+12V power wire.

8. Connect the audio outputs of the unit to a signal processor or

amplifier.

Bluetooth Pairing and Streaming:

1. After the ACX-BT1 is powered up, you will see a small blue LED

flashing quickly from within the unit.

2. Open the Bluetooth settings or connections on your mobile

device.

3. Find the device called "AudioControl BT1" and tap or click on it to

pair your device.

4. Once paired, the blue LED will illuminate continuously.

5. Open your favorite music application and hit play on your favorite

jam.

6. Once music (or any sound) is playing, the red LED will shine forth

from within the ACX-BT1.

7. Enjoy your new Bluetooth streaming device and the sonic bliss

you're about to experience.

8. Enjoy the drive!