Belden FX FUSION SC CONNECTOR Kurulum Kılavuzu - Sayfa 6
Kablolar ve konektörler Belden FX FUSION SC CONNECTOR için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Belden FX FUSION SC CONNECTOR 8 sayfaları. 900μm tight buffer/250μm
Ayrıca Belden FX FUSION SC CONNECTOR için: Kurulum Kılavuzu (8 sayfalar)
Sayfayı Yazdır
Precision cleaver with fixed holder:
Precision cleaver used with available
magnetic holder:
FX FUSION SC CONNECTOR
2 mm - INSTALLATION GUIDE
15.
Place the cleaved fiber in the
V-groove (on the right side) of
the fusion splicer.
The placement of the end face is
NOTE:
important. Fibers end face should be
located in between the V-groove and
electrodes as shown.
16.
Perform the fusion.
17.
Bring the splice protection sleeve
close to the splicer.
PX106501-EN REV C
Page 6 of 8