Contacta STS-K071 Kurulum ve Kullanım Kılavuzu - Sayfa 7
Mikrofon sistemi Contacta STS-K071 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Contacta STS-K071 20 sayfaları. Window intercom system - speaker and microphone pod
Ayrıca Contacta STS-K071 için: Kurulum ve Kullanım Kılavuzu (16 sayfalar)
Sayfayı Yazdır
Amplifier Installation
1. Place the amplifier under the staff counter, ensuring that it will not
obstruct staff when they are sitting.
2. Mark the four fixing points for the amplifier under the counter.
3. Drill and fix the amplifier in place using the supplied screws.
4. Install the amplifier's power supply close to a power socket outlet using
the supplied mounting bracket and fixing screws.
Amplifier Connections
After all relevant components have been installed, connect all green plugs to
the sockets at the rear of the amplifier following the layout detailed below.
Power input
connection
Use power supply
through ground
supply only
Hearing loop aerial
Customer speaker connection
Staff speaker connection
Amplifier Installation
Line in connection for
external audio source
Fixing points
Staff microphone connection
Customer microphone connection
Confidence LED (if required) for status alerts
and fault detection
LED connection or alert tone (if required)
Confidence LED to confirm the system is powered
or an alert tone for the attention of staff
7