Contacta STS-K071 Kurulum ve Kullanım Kılavuzu - Sayfa 9
Mikrofon sistemi Contacta STS-K071 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Contacta STS-K071 20 sayfaları. Window intercom system - speaker and microphone pod
Ayrıca Contacta STS-K071 için: Kurulum ve Kullanım Kılavuzu (16 sayfalar)
Sayfayı Yazdır
Speaker and Microphone Pod - STS-K071
1. Place the staff pod on the staff side of the counter top, ensuring it does
not cause an obstruction and is as close to staff as possible. It should
ideally be no more than 300mm away from a staff member.
2. Place the speaker pod on the customer side of the counter top, ensuring it
does not cause an obstruction.
3. Place the mouse microphone on the customer side of the counter top,
ensuring it does not cause an obstruction and is as close to customers as
possible.
4. Speaker pods and staff pods can be either free standing or fixed. Move to
step 8 if you do not wish to fix the pods to the counter.
5. Use cable management holes in the counter to run the staff pod, speaker
pod, and mouse microphone cables to the amplifier. If there are not
already cable management holes, drill suitable locations near the rear of
both the staff and customer sides of the counter.
6. If fixing the pods to a surface, remove the top of the pods to gain access
to the fixing points. Mark the two fixing points on both the bottom of the
speaker pod and staff pod. Then mark two cable holes to be drilled, one
for both the customer side and the staff side.
7. Ensure there will be access to retrieve the cables then drill the holes.
8. Fix the pods to their respective counters.
9. Feed all wires through the cable management holes.
10. Route all cabling neatly to the amplifier location on the staff side.
9