Duratuf KIWI MK2A Montaj Talimatları Kılavuzu - Sayfa 12
Dış Mekan Depolama Duratuf KIWI MK2A için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Duratuf KIWI MK2A 16 sayfaları.
Ayrıca Duratuf KIWI MK2A için: Montaj Talimatları Kılavuzu (18 sayfalar)
Step 1: Position Door Track (107) on front wall up
against underside of Roof, with right hand
end flush with the right hand corner. Pre-drill
hole in centre and rivet in place. Remove ALL
drill filings
Step 2: Hang door in Door Track. At the right hand
end of Door Track, adjust up or down so that
the Door hangs parallel with shed. Fit one
rivet at right hand end to hold in place. Repeat
with left hand end of track.
Step 3: Remove Door. Pre-drill holes into each Rib
and at similar spacings into Over Door Flash-
ing. At approximately 1/3 in from each end of
Door Track put a 50mm nail. Fix rivets to rest
of holes
Step 4: Clean out ALL drill filings. Also make sure
the Wheels are cleaned of drill filings. Re-
hang Door, then insert door stops into the
pre drilled holes at end of tracks as shown in
diagram. Tighten with two spanners
MK2A DOORS
12
Nut
Washer
Aluminium
Door Stop
Door Track
Washer
Bolt