Elsner 10150 Operasyon - Sayfa 6

Kontrolör Elsner 10150 için çevrimiçi göz atın veya pdf Operasyon indirin. Elsner 10150 13 sayfaları. Radio control system
Ayrıca Elsner 10150 için: Teknik Açıklama, Kurulum Talimatları (20 sayfalar)

Sayfayı Yazdır

1.3. Display and operating options on the start

screen

The display has various areas in which information and functions can be called up.

Mode 1

Weekday 3

Outputs 9

(Type, display

position)

Loading data.

1 – Mode

The actual mode of the selected output is displayed.

Tap in the area of the symbol to change mode (Automatic/Manual).

Press in the area of the (Automatic/Manual) symbol to set all outputs to automatic si-

multaneously (press until the high beep "button held down" sounds).

Automatic mode. Automatic functions for the selected output are active.

Manual mode. Output was operated manually or switched to manual mode.

After an output has been operated manually, it remains in manual mode. Auto-

matic mode is inactive. Set an automatic mode reset so that the output switches back

to automatic, once a day or after a certain time after being operated manually (see Gen-

eral settings chapter: Automatic reset in the manual and automatic reset in the individ-

ual automatic descriptions in the manual).

2 – Battery charging status

Observe the chapterCharging the battery, page 5.

Charging status

Battery 2

9 Selected output

Solexa II Control • above Software-Version 1.5 • Version: 07.06.2016

Technical changes and errors excepted.

3 Time

Operating the display

4 To the

Settings

5 Temperature/

weather

6 Time-reception

7 Functions selected

output

8 Rocker switch:

Change output and

operate manually