Elsner 10150 Operasyon - Sayfa 7

Kontrolör Elsner 10150 için çevrimiçi göz atın veya pdf Operasyon indirin. Elsner 10150 13 sayfaları. Radio control system
Ayrıca Elsner 10150 için: Teknik Açıklama, Kurulum Talimatları (20 sayfalar)

Sayfayı Yazdır

3 – Time, day of the week

The time can be displayed in 12- or 24-hour mode. Further information on setting the

clock can be found in the Setting the time chapter in the manual.

4 – Settings menus

Tap to access the automatic settings or

hold down for 3 seconds to access the default settings.

The automatic settings are described in the Automatic chapter in the manual.

The default settings are described in the Default setting chapter in the manual.

5 – Room temperature and weather data

In this area, the indoor temperature value is displayed and, if a weather station is being

used, the outdoor/weather data also. In this case, tap on the area with the values to

switch between the "Temperature" display and the "Brightness/Wind" display.

Further information on the values for brightness and wind is in the manual, chapter

Units for sun and wind, page 178.

6 – Time reception (weather station)

If the radio symbol is displayed in the start screen, the controller has, within the last 5

minutes, received the actual time from the GPS receiver integrated into the weather

station.

If no radio symbol is displayed, then the time has not been received for over 5 minutes.

The controller's internal clock continues to run.

7 – Active output functions

The right-hand edge of the display indicates the selected output functions, i.e. auto-

matic mode status. There is a more precise description in the Meaning of the functional

symbols (automatic mode status), page 8 chapter.

8 – Rocker switch for manual operation

9 – Outputs

Temperature display:

• Current outdoor temperature

(only if a weather station is being used)

• Current indoor temperature

Brightness/wind display

(only if a weather station is being used):

• Current brightness (light intensity)

• Current wind speed

Solexa II Control • above Software-Version 1.5 • Version: 07.06.2016

Technical changes and errors excepted.

Operating the display