Elsner 10150 Operasyon - Sayfa 8

Kontrolör Elsner 10150 için çevrimiçi göz atın veya pdf Operasyon indirin. Elsner 10150 13 sayfaları. Radio control system
Ayrıca Elsner 10150 için: Teknik Açıklama, Kurulum Talimatları (20 sayfalar)

Sayfayı Yazdır

You use the rocker switch to drive or switch the individual outputs manually. The out-

puts are visible at the lower edge of the display with the display position number and

type symbol. The selected output is marked by a frame around the display position

number.

Please note that at this position only outputs are displayed for which the display has

been activated (see manual, Display position chapter in the descriptions of the default

settings for Motor control units (RF-MSG, weather station), for Relay (RF-Relay, RF-HE)

and for Dimmer (RF-L).

Change output.

Operate or switch selected output manually.

Selected output is blocked for manual operation (alarm function active).

1.3.1. Meaning of the functional symbols (automatic mode

status)

The symbols show the automatic mode status for the selected output and the alarm

functions valid for the manual mode. A function is only displayed if it has been activat-

ed for the output.

Shading (shutters, awnings, blinds)

Please note that for an action such as "extend shading" a number of conditions must

be fulfilled. The functions are listed here in the sequence of their priority. This means

that the sun protection function is only executed if all previously named functions for

the shading have been released.

The detailed description of the automatic functions is in the Shading - automatic mode

chapter in the manual.

Alarm functions:

Alarm functions have the highest priority and prevent manual operation of the output.

Wind alarm. Retracted shading.

In automatic mode, manual operation can again be activated, even if the auto-

matic functions are blocked by wind alarm.

Frost alarm (combination of precipitation and low outdoor temperature).

Retracted shading.

Rain alarm.

Retracted shading.

Time and night functions:

Timed closure or timed opening active.

Solexa II Control • above Software-Version 1.5 • Version: 07.06.2016

Technical changes and errors excepted.

Operating the display