ADF ADH100ID Ek Talimatlar - Sayfa 6

Kapalı Şömine ADF ADH100ID için çevrimiçi göz atın veya pdf Ek Talimatlar indirin. ADF ADH100ID 17 sayfaları. Double sided inbuilt heater zero clearance box

Sayfayı Yazdır

ADF 1000 NMV LINEA ZERO CLEARANCE BOX ASSEMBLY INSTRUCTIONS

Minimum Dimensions for Heat Resistant board:

300mm

above ZCB

• Non Combustible Board – Fibre Cement Sheet of 12 or 18mm thick to

prevent cracking, or Skamol Board 40mm or 50mm thick.

• Fix with separate sheets top and bottom, and separate off cuts on each

side. Use the factory cut neat edge to face the heater opening, if not

covering with optional frame or tiling. This is so plastic (will melt) or metal

(will expand and contract) beading is not to be used on the heater opening.

Must leave a 5mm gap between each edge of the heater and the combustible

board to allow for metal expansion.

1445mm to 45mm stud centres.

1355mm opening

1/11/19

1420mm

Fig. 4