Major Manufacturing DRILL MASTER HIT-44 Kullanıcı El Kitabı - Sayfa 4
Matkap Major Manufacturing DRILL MASTER HIT-44 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Major Manufacturing DRILL MASTER HIT-44 12 sayfaları. Drill master
Sayfayı YazdırADJUSTING THE LATCH HOLE
CENTERING FEATURE
The HIT-44 is unique in the fact that the latch or edge bore hole
can be adjusted to drill on center or offset. To check for
centering, just turn the main clamp knob until the right and left
hand jaws are flush with the cut out in the core. If they are both
flush the HIT-44 will drill a centered latch hole. To adjust
centering or set up for an offset hole see next page.