Major Manufacturing DRILL MASTER HIT-44 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Major Manufacturing DRILL MASTER HIT-44에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Major Manufacturing DRILL MASTER HIT-44 12 페이지. Drill master

ADJUSTING THE LATCH HOLE

CENTERING FEATURE

The HIT-44 is unique in the fact that the latch or edge bore hole

can be adjusted to drill on center or offset. To check for

centering, just turn the main clamp knob until the right and left

hand jaws are flush with the cut out in the core. If they are both

flush the HIT-44 will drill a centered latch hole. To adjust

centering or set up for an offset hole see next page.