Major Manufacturing DRILL MASTER HIT-44 Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Дриль. Major Manufacturing DRILL MASTER HIT-44. Major Manufacturing DRILL MASTER HIT-44 12 сторінок. Drill master
Друкувати сторінкуADJUSTING THE LATCH HOLE
CENTERING FEATURE
The HIT-44 is unique in the fact that the latch or edge bore hole
can be adjusted to drill on center or offset. To check for
centering, just turn the main clamp knob until the right and left
hand jaws are flush with the cut out in the core. If they are both
flush the HIT-44 will drill a centered latch hole. To adjust
centering or set up for an offset hole see next page.