CORNING FTH-76 Series Hızlı Başlangıç Kılavuzu - Sayfa 2

Muhafaza CORNING FTH-76 Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. CORNING FTH-76 Series 4 sayfaları. Fiber transition housing

Sayfayı Yazdır

PRECAUTIONS

All applicable regulatory requirements supersede this document. Do not attempt an installation

unless a copy of these requirements is available for reference.

3.1. Laser Handling Precautions

WARNING: Never look directly into the end of a fiber that may be carrying laser light.

Laser light can be invisible and can damage your eyes. Viewing it directly does not cause pain.

The iris of the eye will not close involuntarily as when viewing a bright light. Consequently,

serious damage to the retina of the eye is possible. Should accidental eye exposure to laser

light be suspected, arrange for an eye examination immediately.

WARNING: DO NOT use magnifiers in the presence of laser radiation. Diffused laser light

can cause eye damage if focused with optical instruments. Should accidental eye exposure to

laser light be suspected, arrange for an eye examination immediately.

3.2. Safety Precautions

CAUTION: Recommend the use of safety glasses (spectacles) conforming to ANSI Z87, for

eye protection from accidental injury when handling chemicals, cables, or working with fiber.

Pieces of glass fiber are very sharp and have the potential to damage the eye.

CAUTION: The wearing of cut-resistant safety gloves to protect your hands from accidental

injury when using sharp-bladed tools and armored cable is strongly recommended. Use

extreme care when working with severed armor. There will be a sharp edge where armor is

cut. To minimize the chance of injury from the cut armor, cover the exposed edge with a wrap

of electrical tape. To minimize the chance of injury from sharp-bladed tools, always cut away

from yourself and others. Dispose of used blades and armor scrap properly.

DANGER:

Fiber Optic Cleaning Fluid can cause irritation to eyes on contact. Contains

hydroflurocarbon and alcohol blend. Inhalation of high concentrations of vapor is harmful, may

cause heart irregularities, unconsciousness, or death. Use with adequate ventilation. In case

of eye contact, immediately flush eyes with water for at least 15 minutes. In case of ingestion,

consult a physician.

3.3. Optical Fiber Precautions

CAUTION: Cleaved or broken glass fibers are very sharp and can pierce the skin easily.

Do not let these pieces of fiber stick to your clothing or drop in the work area where they can

cause injury later. Use tweezers to pick up cleaved or broken pieces of glass fibers and place

them on a loop of tape kept for that purpose alone. Good housekeeping is very important.

CAUTION: Fiber optic cable is sensitive to excessive pulling, bending, and crushing forces.

Consult the cable specification sheet for the cable you are installing. Do not bend the cable

more sharply than the minimum recommended bend radius. Do not apply more pulling force

to the cable than specified. Do not crush the cable or allow it to kink. Doing so may cause

damage that can alter the transmission characteristics of the cable; the cable may have to be

replaced.

STANDARD RECOMMENDED PROCEDURE 205-451 | ISSUE 3 | MAy 2019 | PAGE 2 OF 4