Fujitsu F2MC-8FX Series Uygulama Notu - Sayfa 10

Anakart Fujitsu F2MC-8FX Series için çevrimiçi göz atın veya pdf Uygulama Notu indirin. Fujitsu F2MC-8FX Series 23 sayfaları. 8-bit microcontroller
Ayrıca Fujitsu F2MC-8FX Series için: Kullanım Kılavuzu (20 sayfalar), Uygulama Notu (12 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (30 sayfalar), Uygulama Notu (20 sayfalar), Uygulama Notu (21 sayfalar), Kullanım Kılavuzu (21 sayfalar), Kurulum Kılavuzu (23 sayfalar), Kullanıcı Kılavuzu (24 sayfalar), Kurulum Kılavuzu (17 sayfalar)

2. Set the adapter power from OFF to ON (by unplugging and plugging the USB

cable). The reset remains in effect for about 32 to 140 ms after the adapter

power is supplied again.

If the user system and adapter cause an uncontrollable error and the system cannot

be recovered by tool reset generation method 1.), execute tool reset generation

method 2.).

3.3 MCU Board

For details, refer the following manuals:

• MB2146-301 Operation Manual

• MB2146-303 Operation Manual

Align the MCU board and evaluation board facing each other, then plug their mating

connectors together. The connectors are provided with incorrect insertion prevention

keys located diagonally. Position the boards correctly without letting the incorrect

insertion prevention keys interfere with each other and plug connectors together

completely.

Figure 6: Connection of MCU board and Evaluation board

MCU-AN-395002-E-V10

MB2146-09 – Installation Guide

Chapter 3 Setting up the Emulation System

- 10 -

MCU board

Evaluation board