Fujitsu F2MC-8FX Series Uygulama Notu - Sayfa 9

Anakart Fujitsu F2MC-8FX Series için çevrimiçi göz atın veya pdf Uygulama Notu indirin. Fujitsu F2MC-8FX Series 23 sayfaları. 8-bit microcontroller
Ayrıca Fujitsu F2MC-8FX Series için: Kullanım Kılavuzu (20 sayfalar), Uygulama Notu (12 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (30 sayfalar), Uygulama Notu (20 sayfalar), Uygulama Notu (21 sayfalar), Kullanım Kılavuzu (21 sayfalar), Kurulum Kılavuzu (23 sayfalar), Kullanıcı Kılavuzu (24 sayfalar), Kurulum Kılavuzu (17 sayfalar)

Sayfayı Yazdır
Fujitsu F2MC-8FX Series Uygulama Notu

3.2.3 Adapter Interface Specifications

Table 1 shows a pin out of the adapter interface connector mounted on the user
system. Figure 5 shows the connector pins.
Connector
pin No.
1
2
3
4
5
6
7
8
9
10
*: "BGMA" in the "Input/output" column in the table indicates the BGM adapter.

3.2.4 Tool Reset Specifications

A tool reset is a hardware reset by the adapter to reset the entire system of the
microcontroller (including the BDSU module) on the user system. When both the
adapter power and microcontroller's user power are turned on, the tool reset is
canceled automatically to enable the microcontroller to be evaluated. The following
shows how to generate a tool reset and how long it remains in effect.
Tool reset generation methods and reset "L" pulse width:
1. Set the micorocontroller's user power from OFF to ON (power-on reset). The
reset remains in effect for about 16 to 70 ms after the microcontroller's user
power is supplied.
© Fujitsu Microelectronics Europe GmbH
MB2146-09 – Installation Guide
Chapter 3 Setting up the Emulation System
Table 1: Adapter Interface Connector Pin out
Connector
Input/output
pin name
VCC
BGMA
GND
BRSTX
BGMA
BDBMX
BGMA
BSOUT
BGMA
BEXCK
BGMA
BSIN
BGMA
N.C
GND
N.C
Figure 5: Adapter Interface Connector Pins
MCU
Connected to the MCU's Vcc pin.
Connected to the MCU's Vss pin.
MCU
Connected to the MCU's RSTX pin.
Connected to the MCU's MOD pin.
MCU
Connected to the MCU's UO0 pin.
MCU
Connected to the MCU's UCK0 pin.
MCU
Connected to the MCU's UI0 pin.
MCU
Not connected
Connected to the MCU's Vss pin.
Not connected
- 9 -
Remarks
MCU-AN-395002-E-V10