Fujitsu SK-96390-100PMC Kullanıcı Kılavuzu - Sayfa 25

Anakart Fujitsu SK-96390-100PMC için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Fujitsu SK-96390-100PMC 32 sayfaları. Mb96300 series

4 Programming the internal Flash memory

All Flash devices have an internal bootloader for asynchronous- as well as for synchronous-

Flash-programming:

< Asynchronous serial Flash programming via X3 or X5 (UART0 or UART1)

< Synchronous serial Flash programming via X17 (UART2)

This chapter describes the serial asynchronous programming of the internal Flash memory

using 'Flash Memory Programmer 16FX' in automatic mode.

For serial asynchronous programming SUB-D9 connectors X3 or X5, which are connected to

UART0 and UART1 respectively, can be used on the starter kit.

The following jumper settings are necessary:

4.1.1 UART0

Programming

Jumper

JP2

UART0

(SIN0)

JP1

UART0

(SOT0)

Table 4-1: Jumper Settings for Programming via UART0 (X3)

4.1.2 UART1

Programming

Jumper

JP6

UART1

(SIN1)

JP8

UART1

(SOT1)

Table 4-2: Jumper Settings for Programming via UART1 (X5)

SK-96390-100PMC User Guide

Chapter 4 Programming the internal Flash memory

Setting Description

UART

1-2

Setting Description

UART

1-2

SIN0 is connected to RxD of X3

SOT0 is connected to TxD of X3

SIN1 is connected to RxD of X5

SOT1 is connected to TxD of X5

- 25 -

UG-960017-11