Avnet Zynq Mini-ITX Manuel - Sayfa 10
Anakart Avnet Zynq Mini-ITX için çevrimiçi göz atın veya pdf Manuel indirin. Avnet Zynq Mini-ITX 11 sayfaları. Development board arm pjtag interface
4. In the properties window, select the Port Settings tab, verify the settings match
the values shown in the following figure. Click on the Advanced button to
continue.
5. Select an unused COM Port Number and then click OK. The following figure
shows COM1 as the selected COM port number.
6. Click OK in the properties window, close the Device Manager and the Control
Panel.
115200
8
None
1
None
9