Dell PowerVault DR4100 En İyi Uygulamalar Kılavuzu - Sayfa 33

Depolama Dell PowerVault DR4100 için çevrimiçi göz atın veya pdf En İyi Uygulamalar Kılavuzu indirin. Dell PowerVault DR4100 41 sayfaları. Backup and recovery appliance
Ayrıca Dell PowerVault DR4100 için: Başlangıç Kılavuzu (10 sayfalar), Manuel (37 sayfalar), Yayın Notu (16 sayfalar), Manuel (12 sayfalar), Manuel (24 sayfalar), Manuel (23 sayfalar), Qiuck Kurulumu (1 sayfalar), Manuel (27 sayfalar), Manuel (25 sayfalar)

Sayfayı Yazdır

Dell PowerVault DR4100 En İyi Uygulamalar Kılavuzu

administrator@DR1 > network --route --add --network 172.20.21.2 --netmask 255.255.255.0

--gateway 172.20.21.1 --interface eth2

administrator@DR1 > network --route --add --network 172.20.23.2 --netmask 255.255.255.0

--gateway 172.20.23.1 --interface eth3

administrator@DR1 > network --show --routes

Destination

172.20.21.0

172.20.23.0

From either DR1 or DR2 verify network connectivity using the following command:

network -- ping -- destination <ip_address> --interface<eth0,eth1,ethN>

administrator@DR1 > network --ping --destination 172.20.23.2 --interface eth3 --tries 1

10. Assuming that DR1 and DR2 already had replication established, stop replication and update it to use the newly

configured interfaces using the commands below.

replication --stop --name <replication_container> --role <source|target>

replication --update --name <replication_container> --peer <target_ip_address> --replication_traffic

<source_ip_address> --role source

administrator@DR1 > replication --stop --name cv-replicated-maglib --role source

administrator@DR1 > replication --update --name cv-replicated-maglib --peer 172.20.21.2 --

replication_traffic 172.20.20.2 --role source

Note: If a replication pair does not already exist between DR1 and DR2, use the steps outlined in scenario 1 for

assigning replication to designated interfaces and to create a replication pair.

DR4100 Best Practice Guide | April 2014

Gateway

Mask

172.20.20.1

255.255.255.0 eth2

172.20.22.1

255.255.255.0 eth3

Example

Interface

Example