Olympus IX71 Kurulum Kılavuzu - Sayfa 9
Mikroskop Olympus IX71 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Olympus IX71 11 sayfaları. Microscope z-axis motor drive
Ayrıca Olympus IX71 için: Broşür ve Teknik Özellikler (16 sayfalar)
Sayfayı Yazdır
2022/01/10 05:45
Tighten the horizontal adjustment screws after alignment.
Note: there should be no point throughout the 360º rotation of the fine focus knob where
an increase in drag is felt. If drag is felt, repeat the above steps.
Part 4: Installing the Motor Drive Cover Plate and Fine
Focus Knob
Install cover with screws as shown
Screw on small focus knob as shown.
1.
Locate the motor drive cover. Position it over the motor drive assembly and secure in place as
shown, using the two small 4/40 screws and 1/16" Allen wrench provided.
2.
Screw the microscope fine focus knob onto the shaft extension, as shown, while holding the
right fine focus knob. Check to ensure the left fine focus knob does not rub against the cover. If
Applied Scientific Instrumentation - https://asiimaging.com/docs/
9/11
Olympus IX71 Microscope Z-Axis Motor Drive Installation