- ページ 9

顕微鏡 Olympus IX71のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Olympus IX71 11 ページ。 Microscope z-axis motor drive
Olympus IX71 にも：パンフレット＆スペック (16 ページ)

2022/01/10 05:45

Tighten the horizontal adjustment screws after alignment.

Note: there should be no point throughout the 360º rotation of the ﬁne focus knob where

an increase in drag is felt. If drag is felt, repeat the above steps.

Part 4: Installing the Motor Drive Cover Plate and Fine

Focus Knob

Install cover with screws as shown

Screw on small focus knob as shown.

Locate the motor drive cover. Position it over the motor drive assembly and secure in place as

shown, using the two small 4/40 screws and 1/16" Allen wrench provided.

Screw the microscope ﬁne focus knob onto the shaft extension, as shown, while holding the

right ﬁne focus knob. Check to ensure the left ﬁne focus knob does not rub against the cover. If

Applied Scientiﬁc Instrumentation - https://asiimaging.com/docs/

9/11

Olympus IX71 Microscope Z-Axis Motor Drive Installation