Olympus IX71 설치 매뉴얼 - 페이지 9

{카테고리_이름} Olympus IX71에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus IX71 11 페이지. Microscope z-axis motor drive
Olympus IX71에 대해서도 마찬가지입니다: 브로셔 및 사양 (16 페이지)

페이지 인쇄
Olympus IX71 설치 매뉴얼
2022/01/10 05:45
Tighten the horizontal adjustment screws after alignment.
Note: there should be no point throughout the 360º rotation of the fine focus knob where
an increase in drag is felt. If drag is felt, repeat the above steps.
Part 4: Installing the Motor Drive Cover Plate and Fine
Focus Knob
Install cover with screws as shown
Screw on small focus knob as shown.
1.
Locate the motor drive cover. Position it over the motor drive assembly and secure in place as
shown, using the two small 4/40 screws and 1/16" Allen wrench provided.
2.
Screw the microscope fine focus knob onto the shaft extension, as shown, while holding the
right fine focus knob. Check to ensure the left fine focus knob does not rub against the cover. If
Applied Scientific Instrumentation - https://asiimaging.com/docs/
9/11
Olympus IX71 Microscope Z-Axis Motor Drive Installation