Arc Euro Trade SC3 Sökme ve Takma Kılavuzu - Sayfa 6

Torna Tezgahı Arc Euro Trade SC3 için çevrimiçi göz atın veya pdf Sökme ve Takma Kılavuzu indirin. Arc Euro Trade SC3 17 sayfaları.

42. Remove the leadscrew guard.

44. The head may now be lifted clear

of the bed.

48. Press out the spindle assembly.

51. Press or pull off bearing and remove bearing

cover from spindle. Note the bearing fit.

If the bearings are tight to remove, polish the

spindle journals. The front bearing can be a press fit on the shaft but the rear bearing needs

to be push fit to allow accurate preload adjustments to be made by the two C-nuts.

53. Fit bearing cover and press on

nose bearing.

43. Remove the 2 hex socket and 2 hex head screws securing the head to the lathe bed.

45. Remove the front bearing

cover screws.

49. Press out the rear bearing.

54. Press front and rear outer bearing races into the head.

46. Remove lock nuts, gear, belt pulley,

2 spacers and the key from the

spindle rear.

50. Spindle assembly removed.

52. Polish the spindle and test the fit by using

- 6 -

47. Remove the rear bearing

cover.

one of the old bearings (if not damaged).