Siemens Simatic S7-300 Başlarken - Sayfa 5

Endüstriyel Ekipmanlar Siemens Simatic S7-300 için çevrimiçi göz atın veya pdf Başlarken indirin. Siemens Simatic S7-300 32 sayfaları. Automation systems, controlling a physical axis
Ayrıca Siemens Simatic S7-300 için: Kullanıcı Kılavuzu (34 sayfalar), Manuel (21 sayfalar), Kullanım Talimatları (4 sayfalar), Kullanım Talimatları (5 sayfalar), Manuel (35 sayfalar), Başlarken (8 sayfalar), Başlarken (16 sayfalar), Uygulama Açıklaması (24 sayfalar), Manuel (18 sayfalar), Manuel (32 sayfalar), Kurulum ve Donanım Kılavuzu (20 sayfalar)

Introduction

This Getting Started contains a practical example guiding you through eleven steps in

commissioning a fully functional application, and showing you how to carry out motion

commands. It is thus a valuable help in getting started with the basic functions of a CPU

317T-2 DP.

Depending on your degree of experience, working through the sample will take between one

and two hours.

Note

This Getting Started presumes that you have connected a SIMODRIVE 611 universal drive

to the DP(DRIVE) interface of the CPU 317T-2 DP In case you do not have a drive, we

recommend you refer to the Getting started documentation "CPU 317T-2 DP: Controlling a

virtual axis

Note

You can also use the CPU 315T-2 DP instead of the CPU 317T-2 DP. To do this, select

CPU 315T-2 DP in HW Config. Otherwise, the configuring steps are the same.

CPU 317T-2 DP: Controlling a physical axis

Getting Started, 03/2008, A5E00251786-05