Siemens Simatic S7-300 Primeros pasos - Página 5

Navegue en línea o descargue pdf Primeros pasos para Equipamiento industrial Siemens Simatic S7-300. Siemens Simatic S7-300 32 páginas. Automation systems, controlling a physical axis
También para Siemens Simatic S7-300: Manual del usuario (34 páginas), Manual (21 páginas), Instrucciones de uso (4 páginas), Instrucciones de uso (5 páginas), Manual (35 páginas), Primeros pasos (8 páginas), Primeros pasos (16 páginas), Descripción de la aplicación (24 páginas), Manual (18 páginas), Manual (32 páginas), Manual de instalación y hardware (20 páginas)

Introduction

This Getting Started contains a practical example guiding you through eleven steps in

commissioning a fully functional application, and showing you how to carry out motion

commands. It is thus a valuable help in getting started with the basic functions of a CPU

317T-2 DP.

Depending on your degree of experience, working through the sample will take between one

and two hours.

Note

This Getting Started presumes that you have connected a SIMODRIVE 611 universal drive

to the DP(DRIVE) interface of the CPU 317T-2 DP In case you do not have a drive, we

recommend you refer to the Getting started documentation "CPU 317T-2 DP: Controlling a

virtual axis

Note

You can also use the CPU 315T-2 DP instead of the CPU 317T-2 DP. To do this, select

CPU 315T-2 DP in HW Config. Otherwise, the configuring steps are the same.

CPU 317T-2 DP: Controlling a physical axis

Getting Started, 03/2008, A5E00251786-05