ACU-RITE SENC 150 Referans Kılavuzu - Sayfa 6

Medya Dönüştürücü ACU-RITE SENC 150 için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. ACU-RITE SENC 150 20 sayfaları. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
Ayrıca ACU-RITE SENC 150 için: Kurulum Kılavuzu (8 sayfalar), Kurulum Kılavuzu (4 sayfalar), Kurulum Kılavuzu (6 sayfalar), Talimatlar Kılavuzu (12 sayfalar)

2 Preparing the mounting / Mounting information

Traverse path
11.75 mm
(LL x 25.4 + 138.1)/2 mm
0.463"
(LL + 5.437")/2
ML/2 mm
(LL + OT)/2 "
ML = Measuring length
OT = Overtravel 1.75"
Center mounting axis
Mark center of travel
 Move the axis to its center of travel.
 Mark the axis for quick return to center.
 Determine encoder cable exit direction (page 7) and adjust.
6
ML mm
LL + OT "
C L
Scale case
C L
Alignment brackets (2x)
 Align the center marks on the reading head and scale assembly
by sliding the reading head and brackets along the scale.
F
= Machine guideway
 Locate the scale case so underside of end caps are flush
with the axis parting line.
 Mark one end mounting hole location.
Alignment brackets must not be removed until instructed.
SENC 150
Center marks
Cable assembly
Reading head assembly