ACU-RITE SENC 150 참조 매뉴얼 - 페이지 6

{카테고리_이름} ACU-RITE SENC 150에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACU-RITE SENC 150 20 페이지. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
ACU-RITE SENC 150에 대해서도 마찬가지입니다: 설치 매뉴얼 (8 페이지), 설치 매뉴얼 (4 페이지), 설치 매뉴얼 (6 페이지), 사용 설명서 (12 페이지)

페이지 인쇄

2 Preparing the mounting / Mounting information

Traverse path

11.75 mm

(LL x 25.4 + 138.1)/2 mm

0.463"

(LL + 5.437")/2

ML/2 mm

(LL + OT)/2 "

ML = Measuring length

OT = Overtravel 1.75"

Center mounting axis

Mark center of travel

 Move the axis to its center of travel.

 Mark the axis for quick return to center.

 Determine encoder cable exit direction (page 7) and adjust.

ML mm

LL + OT "

C L

Scale case

C L

Alignment brackets (2x)

 Align the center marks on the reading head and scale assembly

by sliding the reading head and brackets along the scale.

= Machine guideway

 Locate the scale case so underside of end caps are flush

with the axis parting line.

 Mark one end mounting hole location.

Alignment brackets must not be removed until instructed.

SENC 150

Center marks

Cable assembly

Reading head assembly