ACU-RITE SENC 150 Panduan Referensi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Referensi untuk Konverter Media ACU-RITE SENC 150. ACU-RITE SENC 150 20 halaman. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
Juga untuk ACU-RITE SENC 150: Panduan Instalasi (8 halaman), Panduan Instalasi (4 halaman), Panduan Instalasi (6 halaman), Petunjuk Manual (12 halaman)

Halaman Cetak

2 Preparing the mounting / Mounting information

Traverse path

11.75 mm

(LL x 25.4 + 138.1)/2 mm

0.463"

(LL + 5.437")/2

ML/2 mm

(LL + OT)/2 "

ML = Measuring length

OT = Overtravel 1.75"

Center mounting axis

Mark center of travel

 Move the axis to its center of travel.

 Mark the axis for quick return to center.

 Determine encoder cable exit direction (page 7) and adjust.

ML mm

LL + OT "

C L

Scale case

C L

Alignment brackets (2x)

 Align the center marks on the reading head and scale assembly

by sliding the reading head and brackets along the scale.

= Machine guideway

 Locate the scale case so underside of end caps are flush

with the axis parting line.

 Mark one end mounting hole location.

Alignment brackets must not be removed until instructed.

SENC 150

Center marks

Cable assembly

Reading head assembly