ACU-RITE SENC 150 Panduan Referensi - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Referensi untuk Konverter Media ACU-RITE SENC 150. ACU-RITE SENC 150 20 halaman. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
Juga untuk ACU-RITE SENC 150: Panduan Instalasi (8 halaman), Panduan Instalasi (4 halaman), Panduan Instalasi (6 halaman), Petunjuk Manual (12 halaman)

Halaman Cetak
SENC 150
Mounting possibilities
Flush
Offset
mounting
mounting
 Use reading head leveling set screws when surfaces are
not flush.
Detailed information about mounting possibilities on page 11
(Mounting the encoder without backup spar) and on page 14
(Mounting the encoder with backup spar).
Backup spar
mounting
Space of ≤4.5 mm (≤0.18") use
reading head leveling screws!
Determining cable direction
 Determine cabel exit direction before mounting the encoder.
 To change the cable exit direction, remove the cover plate
and rotate it by 180°.
K1 - cable exit right side
1
K2 - cable exit left side
1
1

2 Mounting information

Do not pull out the PCB!
1
1
T-10 torx screw
Do not clamp the wires!
1
T-10 torx screw
max. 70 Ncm!
7