Cisco UCS B200 M3 Manuel - Sayfa 3

Ağ Donanımı Cisco UCS B200 M3 için çevrimiçi göz atın veya pdf Manuel indirin. Cisco UCS B200 M3 8 sayfaları. Blade server
Ayrıca Cisco UCS B200 M3 için: Kurulum Kılavuzu (34 sayfalar), Kurulum ve Servis Notu (36 sayfalar), Kurulum ve Servis Notu (37 sayfalar), Yükseltme Kılavuzu (21 sayfalar), Kurulum ve Servis Notu (28 sayfalar)

Install fNIC Drivers

This guide assumes that the UCS 2 .1 .2a or later fNIC drivers have been installed and are running . Please see the Cisco

UCS Manager Install and Upgrade Guides, Virtual Interface Card Drivers section, for complete driver installation instructions:

http://www .cisco .com/c/en/us/support/servers-unified-computing/ucs-manager/products-installation-guides-list .html

In addition, please review the Cisco UCS Hardware Compatibility List (HCL) to confirm hardware, operating system, and driver

compatibility:

http://www .cisco .com/en/US/products/ps10477/prod_technical_reference_list .html

Description: The total number of I/O requests that can be outstanding on a per-LUN basis .

Parameter name: fnic_max_qdepth

Default value: 32

Configuration capabilities:

• Boot Time

» Requires reboot for changes to take effect .

» Changes are persistent across reboots .

• Load Time

» Disruptive to SAN attached storage .

» Requires stopping SAN I/O, removing fNIC module dependencies, and removing and reloading the fNIC module .

» Not possible with the Boot from SAN configuration .

» Changes are nonpersistent across reboots .

• Run Time

» Nondisruptive .

» Changes apply only to newly discovered LUNs after modification .

» Changes are nonpersistent across reboots .