Pioneer GM-X962 Kullanıcı El Kitabı - Sayfa 4
Amplifikatör Pioneer GM-X962 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Pioneer GM-X962 18 sayfaları. Bridgeable power amplifier
Ayrıca Pioneer GM-X962 için: Kullanıcı El Kitabı (8 sayfalar)
Sayfayı Yazdır
- 1. Before Using this Product
- 2. Composition of Manual
- 3. Setting the Unit
- 4. Connecting the Unit
- 5. Connection Diagram
- 6. Connecting the Power Terminal
- 7. Connecting the Speaker Terminals
- 8. Connecting the Speaker Wires
- 9. Two-Channel Mode (Stereo)
- 10. Component Guide
- 11. Example of Installation on the Floor Mat or on the Chassis
- 12. Specifications
- 13. Average Current Drawn
Setting the Unit
Gain Control
If the sound level is too low, even when
the volume of the car stereo used along
with this power amplifier is turned up,
turn gain control on the front of the
power amplifier clockwise. If the sound
distorts when the volume is turned up,
turn the gain control counter-clockwise.
• When using with an RCA equipped car
stereo (standard output of 500 mV), set to
the NORMAL position. When using with
an RCA equipped Pioneer car stereo with
max. output of 4 V or more, adjust level to
match the car stereo output level.
Power Indicator
The power indicator lights when the
power is switched on.
LPF (Low-Pass Filter) Select Switch
Set the LPF select switch as follows according to the type of speaker that is connected to the
speaker output connector and the car stereo system:
LPF Select
Audio frequency range
Switch
to be output
LPF (left)
Very Low Frequency range
OFF (right)
Full range
Speaker
Remarks
Type
Subwoofer
Connect a subwoofer.
Full range