Pioneer GM-X962 Kullanıcı El Kitabı - Sayfa 6
Amplifikatör Pioneer GM-X962 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Pioneer GM-X962 18 sayfaları. Bridgeable power amplifier
Ayrıca Pioneer GM-X962 için: Kullanıcı El Kitabı (8 sayfalar)
Sayfayı Yazdır
- 1. Before Using this Product
- 2. Composition of Manual
- 3. Setting the Unit
- 4. Connecting the Unit
- 5. Connection Diagram
- 6. Connecting the Power Terminal
- 7. Connecting the Speaker Terminals
- 8. Connecting the Speaker Wires
- 9. Two-Channel Mode (Stereo)
- 10. Component Guide
- 11. Example of Installation on the Floor Mat or on the Chassis
- 12. Specifications
- 13. Average Current Drawn
Connection Diagram
Grommet
GM-X962: Fuse (25 A)
GM-X862: Fuse (25 A) × 2
Speaker terminal
See the "Connecting the
Speaker wires" section
for speaker connection
instructions.
Fuse (30 A)
Fuse (30 A)
Front side
× 2
System remote control wire (sold separately)
Connect the male terminal of this wire to the system remote control
terminal of the car stereo (SYSTEM REMOTE CONTROL). The
female terminal can be connected to the auto-antenna relay control
terminal. If the car stereo does not have a system remote control ter-
minal, connect the male terminal to the power terminal through the
ignition switch.
Special red battery wire [RD-223] (sold separately)
After making all other connections at the amplifier,
connect the battery wire terminal of the amplifier to
the positive (+) terminal of the battery.
Ground wire (black) [RD-223] (sold separately)
Connect to metal body or chassis.
Connecting wires with RCA
pin plugs (sold separately).
External Output
RCA input jack
Back side
Car stereo with
RCA output jacks