3D Hobby Shop 59" AJ Slick Kurulum Kılavuzu - Sayfa 18

Hava Araçları 3D Hobby Shop 59" AJ Slick için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. 3D Hobby Shop 59" AJ Slick 20 sayfaları.

Sayfayı Yazdır
18
Install the cowl and use the holes in the paper markers to help you install the wood screws in the right
location.
Glue the aileron hinges with two large drops of CA per hinge.
On the bottom of the wings, locate the servo cutout and aileron control horn slot. Remove the covering
over both. Glue the horn into the slot with a generous amount of medium or thick CA. Use the string in
the wing to pull the servo wire through the wing.