3D Hobby Shop 59" AJ Slick Kurulum Kılavuzu - Sayfa 17

Hava Araçları 3D Hobby Shop 59" AJ Slick için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. 3D Hobby Shop 59" AJ Slick 20 sayfaları.

The firewall of the Slick is arranged to allow the widest possible selection of motors to fit. Extra space has

been provided for long motors and long prop adaptors. For this reason, if your motor is compact, you will

need to supply spacers to extend the motor forward as shown. Attach the motor using the included

4mms screws and blind nuts, using loctite. Mount your ESC to the side of the motor-mounting box.

The cowl is mounted onto the fuselage with 4 wood screws. These screws go into the small plywood

squares on the front inside of the fuselage. Soak these squares in thin CA glue to harden them before

proceeding.

The following procedure is helpful to be sure the wood screws hit the plywood squares.

First, make small holes into the plywood squares through the covering, with the cowl and canopy off.

Tape small pieces of paper over these holes, as shown, and mark the hole locations on these pieces of

paper.