Aerial Assault Wakeboard Tower Kurulum Kılavuzu - Sayfa 9

Tekne Ekipmanları Aerial Assault Wakeboard Tower için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Aerial Assault Wakeboard Tower 13 sayfaları.

Sayfayı Yazdır

STEP 8 - CONTINUED...

steP 9

SpLIT Lock wAShEr

STEP 10

m6 x 12mm

ThrEADED LAp joInT

SpLIT Lock wAShEr

m12 x 40mm

m12 x 45mm

m12 x 40mm

SpLIT Lock wAShEr

ThrEADED LAp joInT

m10 x 25mm

The side rails need to be mounted straight up and down. If

they are leaning in or out, this will cause a problem with the

tower when you want to fold it.

Assembling the Switch Blade (Rear Leg)

Start at the top of the switch blade and attach the trim

washer, shoulder bolt and threaded lap joint.

We recommend assemblying all the blade components

before installing the blade on the tower.

You will then need to attach the lower base to the thread-

ed lap joint. This is then followed by attaching the clamp

to the lower base (using the stainless steel socket head cap

screw.)

GUIDE#: pwb-ASSAULT-004