Division 6 NV3340VCOEB Yapım Talimatları - Sayfa 3

Mikrodenetleyiciler Division 6 NV3340VCOEB için çevrimiçi göz atın veya pdf Yapım Talimatları indirin. Division 6 NV3340VCOEB 3 sayfaları.

Install Knobs on Pot Shafts

Turn the pot shafts all the way counter-clockwise. Push the knobs onto the

pot shafts with the pointers at about the 7 o'clock position.

Install IC

Before inserting U1 into its socket, you may need to bend the pins inward a bit

so that they'll line up with the socket holes. Lay the IC on its side on a flat

surface, then gently press down on the top of the chip so that the pins bend

evenly. Repeat for the other side of the chip.

Insert the chip into its socket, making sure that the pin 1 dot/notch on the chip

is on the same end as the pin 1 notch in the socket.

THE END

CEM3340 VCO Build Instructions

Page 3/3