DNP DS40 Bakım Kılavuzu

Yazıcı DNP DS40 için çevrimiçi göz atın veya pdf Bakım Kılavuzu indirin. DNP DS40 6 sayfaları. Photo imaging
Ayrıca DNP DS40 için: Hızlı Referans (6 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Yeniden Paketleme Kılavuzu (2 sayfalar)

ON SET PRINTER MAINTENANCE – DS40 PHOTO PRINTERS

This procedure is to be completed in conjunction with the

following additional modules:

•

112 – Setting up a Santa set – POS Case

•

121 – Software required to operate a Santa Set -

TEPS

All locations use DNP DS40 printers.

DNP DS40 printers use a technique called Dye-Sublimation printing in which the ink

from a roll of coloured ribbon is transferred to the print substrate (paper) using heat,

followed by a clear, UV protective layer being laid on top of the finished image. This

produces a long lived & vibrantly coloured image that can be produced instantly, on

site.

The power switch for a DS40 printer is located on the bottom right of the front panel of

the printer (Figure 1).

When a printer requires a media change the orange lights on the front left-hand panel

of the printer will light up.

the paper it is ESSENTIAL that both the paper roll & ribbon are changed together, as

a set.

Even if it appears there is some paper remaining, this should be discarded along

with the used ribbon.

Standard Operating Procedure |

Even though there are separate lights for both the ribbon &

Module 114

Figure 1 – DNP DS40 Printer