DNP DS40 유지 관리 매뉴얼

{카테고리_이름} DNP DS40에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DNP DS40 6 페이지. Photo imaging
DNP DS40에 대해서도 마찬가지입니다: 빠른 참조 (6 페이지), 빠른 시작 매뉴얼 (8 페이지), 재포장 매뉴얼 (2 페이지)

페이지 인쇄
DNP DS40 유지 관리 매뉴얼
ON SET PRINTER MAINTENANCE – DS40 PHOTO PRINTERS
This procedure is to be completed in conjunction with the
following additional modules:
•
112 – Setting up a Santa set – POS Case
•
121 – Software required to operate a Santa Set -
TEPS
All locations use DNP DS40 printers.
DNP DS40 printers use a technique called Dye-Sublimation printing in which the ink
from a roll of coloured ribbon is transferred to the print substrate (paper) using heat,
followed by a clear, UV protective layer being laid on top of the finished image. This
produces a long lived & vibrantly coloured image that can be produced instantly, on
site.
The power switch for a DS40 printer is located on the bottom right of the front panel of
the printer (Figure 1).
When a printer requires a media change the orange lights on the front left-hand panel
of the printer will light up.
the paper it is ESSENTIAL that both the paper roll & ribbon are changed together, as
a set.
Even if it appears there is some paper remaining, this should be discarded along
with the used ribbon.
Standard Operating Procedure |
Even though there are separate lights for both the ribbon &
Module 114
Figure 1 – DNP DS40 Printer